[E550] Paper remaining on the transport path
Classification | Error content |
Other jam | Paper remaining jam on the transport path |
Proce dure | Check item | Result | Measure | Next Step |
1 | Open the cover of the unit/ area whose picture is blinking on the control panel. Is there any paper on the transport path? | Yes | Remove the paper. |
|
No |
| 2 | ||
2 | Is the sensor in the jamming area working? (Perform the input check in the test mode: refer to the following table) | Yes |
| 3 |
No | • Check if the connector of the sensor is disconnected. • Check if any of the connectors on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the sensor. • Replace the LGC board. |
| ||
3 | LGC board |
| • Replace the LGC board. |
|
Parts to be replaced | Remark |
Sensor | Refer to the following table |
LGC board |
|