Misfeed copier E010 Toshiba photocopy machine, open side cover of the copier in Toshiba photocopy machine 2523A-2323AM-2523AD-2303A-2309A-2006
{Misfeed copier E010 }- Jam not reaching the exit sensor
{Misfeed copier E020 }- Stop jam at the exit sensor
Solution call for service E010-E020
Misfeed copier E010 Toshiba photocopy machine
Description
Remedy
[E010] The paper which has passed through the fuser unit does not
reach the exit sensor.
[E020] The trailing edge of the paper does not pass the exit sensor
after its leading edge has reached this sensor
Procedure
Check item
Result
Measure
Next Step
1
Has multiple feeding
occurred?
Yes
No
- If multiple feeding has occurred, check the
condition of the separation pad or the separation
roller in the paper source. Replace it if it is worn
out.
• Check if the transparent sheet attached near to
the separation pad or the separation roller is
deformed. Replace it if it is deformed.
2
2
Open the right cover. Is
there any paper on the
transport path?
Yes
No
- Remove the paper.
If No Next step 3
3
Is the exit sensor working?
(Perform the input check
in the test mode: 03-[A]/
[B])
Yes
No
if yes Next 4
• Check if the connector of the exit sensor is
disconnected.
• Check if the connector CN8 on the MAIN board
is disconnected.
• Check if the connector pins are disconnected
and the harnesses are open circuited.
• Check if the conductor pattern on the MAIN
board is short circuited or open circuited.
• Replace the exit sensor
• Replace the MAIN board
If yes Next step 4
4
- Is the registration roller clutch working? (Perform the output check in
the test mode: 03 108/158)
Yes
No
if yes Next 5
• Check if the connector of the registration roller clutch is disconnected.
• Check if the connector CN14 on the MAIN board is disconnected.
• Check if the connector pins are disconnected and the harnesses are open circuited.
• Check if the conductor pattern on the MAIN board is short circuited or open circuited.
• Replace the registration roller clutch.
• Replace the MAIN board.
If yes Next step 5
5
- Registration roller
Check the registration roller. Replace it if it is worn
out.
Parts to be replace
Remarks
- Exit sensor
- MAIN board
- Registration roller clutch
- Registration roller
Misfeed copier E010 Toshiba photocopy machine
আপনি যদি সমস্যাটির সমাধান না করতে পারেন তাহলে আমাদের দক্ষ ইঞ্জিনিয়ারের মাধ্যমে সমাধান করিয়ে নিতে পারেন।
Contact With us..
Address : 55/B, purana polton Dhaka
Mob : 01611-482988
Hot Line: 01843-209242
E-mail : ikinternational061@gmail.com
E-mail: support@toshibabd.com
Facebook Group: Join Now
Facebook page : Follow Now
YouTube: Watch our service videos
web : visit now
web : Visit now
Misfeed copier E010 Toshiba photocopy machine